Our Services

Rubber Wood

In an effort to better utilize plantation timbers, which, like rubber wood, are essentially small girth log and dimensionally not very stable like forest timbers, techniques for finger jointing to increase the length and edge glue to make wider boards was developed. High performance adhesives of D3 and D4 standards are used and small size timber is successfully finger jointed to make long lengths and edge glued to make wider planks. Such engineered lumber and lumber boards are successfully used in western countries. We are proud to inform you that we have bought this latest technology to India for better utilization of rubber wood. Since these are made on Automatic German machines using carbide cutters and the glues are of D3 and D4 standard, the glue joints are guaranteed for fail safe and water resistant qualities.

Boards are offered with thickness of 8, 12, 15, 24, 32, 35, 40 MM in size of 8' X 4' with grades namely Supreme, Deluxe, and Regular.

Boards

The raw material, which is rubber wood cut to size, is first protected from Fungus and Termite attack by the Pressure Treatment with Borax and Boric acid in a timber preservation treatment plant. During this process required quantity of this Chemical is absorbed by timber which protects it from decay. After this, the timber is dried to uniform low moisture content by Timber Dryers. After this treatment and drying (Seasoning), due to the nature of rubber wood some timbers develop bend, twist and crack etc. These defective portions are cut and thrown away as waste. The straight pieces of rubber wood after treatment, seasoning and cutting away the defects is our sold as Stone plyboardRSKD. RSKD is the term used in Timber trade for dried and seasoned timber in the rough sawn stage Treated, Seasoned to international standards and cut to size is supplied as RSKD in standard sizes as well as S4S (Four side planes) and also as made-up products against orders.

This budget-friendly 'Ready-to-use' timber is ideal for joinery, furniture making, interiors and general carpentry work. It leads itself easily to planning, sanding, carving and polishing, and is amenable to all surfaces.

Plywood

Made only from veneers of the highest quality Rubber Wood. MR Grade plywood is a technical marvel. Bonded with un-extended Urea Formaldehyde Synthetic Resin (Confirming to IS 848: 1974), it is treated with highly durable preservatives of glue line poisoning technology that protects it from termites and borers.

Standard Sizes 244 cm X 122 cm …. 244 cm X 92 cm 214 cm X 122 cm …. 214 cm X 92 cm 184 cm X 122 cm …. 184 cm X 92 cm Standard Thickness 4 mm, 6 mm, 8 mm, 12 mm, 15 mm, and 18 mm

Technical Data Specific Gravity 0.63 gm/cc Bending Strength kg/sq.cm above 400 kgs/sq.cm Screw holding strength above 250 kgs Nail holding strength above 60 kgs Moisture content 10-15%